Customization: | Available |
---|---|
Type: | EPS Foam Machine |
Raw Material: | LDPE |
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
item | epe foam tube extrusion line | epe foam rod extrusion line | |||||||||
type | EPE70 | EPE75 | EPE90 | EPE105 | EPE120 | EPE70 | EPE75 | EPE90 | EPE105 | EPE120 | |
extruder | 70/50 | 75/50 | 90/50 | 105/50 | 120/50 | 70/50 | 75/50 | 90/50 | 105/50 | 120/50 | |
screw speed | r/min | 5-55 | 5-50 | 5-45 | 5-40 | 5-30 | 5-55 | 5-50 | 5-45 | 5-40 | 5-30 |
foaming rate | 20-40 | 20-40 | 20-40 | 20-40 | 20-40 | 20-40 | 20-40 | 20-40 | 20-40 | 20-40 | |
spec.of product | mm | Φ10-50 | Φ10-60 | Φ20-80 | Φ20-100 | Φ20-120 | Φ6-30 | Φ6-38 | Φ6-50 | Φ10-80 | Φ10-100 |
colling method | cooled by water and air | ||||||||||
installed capacity | kw | 60 | 65 | 90 | 105 | 120 | 60 | 65 | 90 | 100 | 120 |
dimension | m | 15*1.3*1.7 | 16*1.3*1.7 | 18*1.6*1.7 | 20*1.8*1.8 | 22*1.8*1.8 | 20*1.8*1.8 | 20*1.8*1.8 | 20*1.8*1.8 | 20*1.8*1.8 | 20*1.8*1.8 |
total weight9about) | t | 6 | 7 | 8 | 9 | 10 | 6 | 7 | 8 | 9 | 10 |
Product Application:
EPE foam pipe is a kind of new-type foam material and it is widely used in the jacket of air conditioner, pipeline, heat insulation, toy guardrail, recreation place etc. Due to its high foam ration, good elasticity and heat preservation. As a kind of new type foam filling and ornament material. EPE foam rod is widely used in spring mattress, soft stem and edge, automobile seat, sofa backrest and top-grade clothing. It is also widely used in the filling of contracting joint in building due to its good rebound elasticity.
Main Features:
1.Extruder: high output, low melting temperature,according to the different material, to replace extruder.
2.Screw: specially design for PE pipe, to ensure high efficiency, high yield.
3. Reducer: high speed, low noise, hard tooth-surface.
4. Die head: low melting temperature design; special mould design to reduce changing time of the mould.
5. Cooling system: stainless steel sink,high power pump, head and high efficiency cooling.
6. If changing auxiliary engine,it can produce rods and pipes.